8-bit ATtiny AVR-RISC microcontroller, 2 KB, 8 MHz, PDIP-20

8-bit AVR® Microcontroller with 2K Bytes Flash

Description
The high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller combines 2KB of ISP flash memory, 128B ISP EEPROM, 128B internal SRAM, one 8/16 bit timer/counter with prescaler, one 8/10-bit high-speed timer/counter with PWM and separate prescaler, 10-bit A/D converter, a USI (Universal serial interface), and debugWIRE for on-chip debugging. The device supports throughput of 20 MIPS at 20 MHz and operates between 1.8-5.5 volts.
By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Features

- High-performance, Low-power AVR® 8-bit Microcontroller

- RISC Architecture
- 118 Powerful Instructions - Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 16 MIPS Throughput at 16 MHz

- Data and Non-volatile Program Memory
- 2K Bytes of In-System Programmable Program Memory Flash
Endurance: 10,000 Write/Erase Cycles
- 128 Bytes of In-System Programmable EEPROM
Endurance: 100,000 Write/Erase Cycles
- 128 Bytes Internal SRAM
- Programming Lock for Flash Program and EEPROM Data Security

- Peripheral Features
- 8-bit Timer/Counter with Separate Prescaler
- 8-bit High-speed Timer with Separate Prescaler
2 High Frequency PWM Outputs with Separate Output Compare Registers
Non-overlapping Inverted PWM Output Pins
- Universal Serial Interface with Start Condition Detector
- 10-bit ADC
11 Single Ended Channels
8 Differential ADC Channels
7 Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
- On-chip Analog Comparator
- External Interrupt
- Pin Change Interrupt on 11 Pins
- Programmable Watchdog Timer with Separate On-chip Oscillator

- Special Microcontroller Features
- Low Power Idle, Noise Reduction, and Power-down Modes
- Power-on Reset and Programmable Brown-out Detection
- External and Internal Interrupt Sources
- In-System Programmable via SPI Port

- I/O and Packages
- 20-lead PDIP/SOIC: 16 Programmable I/O Lines
- 32-lead QFN/MLF: 16 programmable I/O Lines

- Operating Voltages
- 2.7V - 5.5V for ATtiny26L
- 4.5V - 5.5V for ATtiny26

- Speed Grades
- 0 - 8 MHz for ATtiny26L
- 0 - 16 MHz for ATtiny26

- Power Consumption at 1 MHz, 3V and 25°C for ATtiny26L
- Active 16 MHz, 5V and 25°C: Typ 15 mA
- Active 1 MHz, 3V and 25°C: 0.70 mA
- Idle Mode 1 MHz, 3V and 25°C: 0.18 mA
- Power-down Mode: < 1 µA